Precautions and suggestions for consumables of inkjet printer

What should I pay attention to when using the consumables of the inkjet printer?

First of all, the inkjet printer is somewhat different from the working equipment in other factories. Its principle is to deflect by high-voltage static electricity, so it must be well grounded. If it is well grounded, the static electricity will not be accumulated all the time. The accumulation of static electricity may cause problems such as bad ink dot splitting, irregular characters of inkjet printer, scattered dot matrix, and even spark, or even fire. Therefore, for the safety of factory personnel and machines, it is necessary to pay attention to the grounding of the inkjet printer.

Secondly, the ink and solvent of the inkjet printer are toxic, volatile and corrosive. We should try our best to prevent them from contaminating the eyes, skin, nose, etc. when using them. If you accidentally splash them when cleaning or adjusting the ink line, please wash them with a large amount of clean water. If you still feel unwell after cleaning with a large amount of water, please see a doctor for examination. Most ink solvents have volatile components that are easy to be inhaled into the lungs. Therefore, good ventilation equipment and air circulation must be ensured at the site where the inkjet printer is used. It is necessary to maintain a cautious attitude both in use and maintenance. Guangzhou Microinlay reminds you that the inks used by Microinlay are environmentally friendly inks, non-volatile, non-toxic and harmless, so you also need to know more when choosing manufacturers to cooperate, and you must choose environmentally friendly inks

Finally, when using the inkjet printer, its special ink, solvent or cleaning fluid should not be mixed with water or other ingredients. The composition requirements of the ink of the inkjet printer are relatively high, and it is particularly sensitive to moisture. In the process of inkjet printing, it is very important to ensure the composition of the ink because the charging tank needs to accurately charge the ink point and the high-voltage deflection plate needs to deflect the charged ink point. Also, because the consumables of the inkjet printer are conductive, we must pay attention to prevent fire at this time. If we need to wipe after cleaning the nozzle, The non-fiber paper towels that must be used must be taken care of in advance, and must be recycled in time after use and treated with safe methods. If the equipment is on fire and cannot be put out with water, the first point is to disconnect the power supply, and then take emergency measures to remedy it.


Post time: Feb-24-2023